Precision storage and distribution technology

The distribution of loads to workstations, buffer lanes, shipping lanes, and pre-storage zones must be performed rapidly and with absolute precision. Of course, the same applies for multi-level storage areas. This is where our tried-and-tested customised products come into their own.

Schwingshandl Verfahrwagen bis 50kg v2
UP TO 50 KG

Transfer car

The transfer car is used to distribute totes, cartons, trays at workstations, buffer lanes, shipping lanes…
Schwingshandl Verfahrwagen mit Hub bis 50kg
UP TO 50 KG

Transfer car with hoist

The transfer car with hoist is used to distribute totes, cartons or trays at workstations, multi-level buffer…
Schwingshandl Hubbalkengeraet bis 50kg 1
UP TO 50 KG

Hoist beam device

The hoist beam device is used for storing totes, cartons or trays.
Schwingshandl Abzugsshuttle bis 50kg
UP TO 50 KG

Special solutions

Different special solutions such as take-off shuttles for beverage crates round off our product portfolio.
Schwingshandl Verfahrwagen bis 500kg
UP TO 500 KG

Transfer car with frictional drive

The transfer car with frictional drive is used to distribute stacks of containers, plastic pallets, grid…
Schwingshandl Verfahrwagen mit Zahnriemenfoerderer bis 500kg
UP TO 500 KG

Transfer car with tooth belt drive

The transfer car with tooth belt drive is used to distribute stacks of totes, plastic pallets, grid boxes…
Schwingshandl Verfahrwagen mit Hub bis 500kg
UP TO 500 KG

Transfer car with hoist

The transfer car with hoist is used to distribute stacks of totes, plastic pallets, grid boxes, trays or…
Schwingshandl Querverfahrwagen mit Reibrad bis 3000kg
UP TO 3.000 KG

Transfer car with frictional drive

The transfer car with frictional drive is used to distribute pallets or grid boxes at work stations, buffer…
Schwingshandl Querverfahrwagen doppelt mit Zahnriemen bis 3000kg
UP TO 3.000 KG

Transfer car with tooth belt drive

The transfer car with tooth belt drive is used to distribute material to work stations, buffer lanes…
Schwingshandl Verfahrwagen mit Hub bis 3000kg
UP TO 3.000 KG

Transfer car with hoist

The transfer car with hoist is used to distribute pallets or grid boxes at work stations, multi-Level buffer…
Schwingshandl Verschiebeeinheit bis 3000kg v2
UP TO 3.000 KG

Sliding unit

The sliding unit is used for short distances to distribute material to work stations, buffer lanes, shipping…

Our Process for your solution

Planning

Throughout the planning phase we will work closely with you to ensure you get the best cost/benefit ratio and highest return on investment.

Design

We work with the very latest 3D design, computing and simulation programs and use computer animations to simulate the movements and processes of our logistics systems.

Project Management

We will support you throughout the process, from layout planning to final acceptance. Quality, costs, and deadline management take top priority.

Production

Your equipment is produced and pre-assembled at our factory, and, after passing inspection, packed ready for shipping. If you’d like us to arrange a test setup for pre-acceptance, that’s possible too – just let us know.

Assembly

Our machines and systems are shipped worldwide and assembled by highly-qualified employees. Our experts will also be on-hand to provide professional support during the commissioning stage.

After Sales

You can always count on us to provide spare parts or technical support at short notice. Rapid handling of spare parts is our top priority, and we perform service and maintenance work worldwide.

Make a smart choice

We’ll take care of every stage of your project, from planning and design through to production and assembly. All you have to do is tell us what you need.